Description
Pompa Celup Pedrollo Air Bersih TOP FLOOR
Range Of Performance
Flow rate up to 220 l/min (13.2 m3/h)
Limits Of Use
- Dept up to 3 m
- Liquid temperature up to +40°C (90°C for a maximum up to ømm
- Drainage level 2 mm from the bottom
Installation and Use
The top-floor series is suitable for draining clear water without abbrasive particles. their ability to drain water down to 2 millimetres from the floor makes then ideal for emergency domestic use for small flooded areas and in all those applications where maximum drains is required.
Conctruction Characteristic
- Delivery Body : glass filled technopolymer, particularly, resistant to impact corrosion, with threaded port ISO 228/1
- Suction Grid : technopolymer
- Impeller : Open type in technopolymer
- Motor Support : Stainless steel AISI 304
- Motor Shaft : Stainless steel EN 10088-3-1.4104
- Double Seal : mechanica seal ceramic-graphite-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
- Motor : submersible asynchronous single-phase for continuous duty
- Top-Floor : single- phase 220÷240 V – 50 Hz with capacitor and thermal overload protector
- Insulation : class F
- Protection : IP 68
- Registered Model n° 72765
Standard Features
TOP-Floor Neoprene power cable “H05 RN-F” length 5 metres with schuko plug