Description
Pompa Celup Pedrollo Air Bersih Stainless VL (SUS 304)
Range Of Performance
Flow rate up to 120 l/min (7.2 m3/h)
Head up to 105 m
Limits Of Use
Manometric, suction lift up to 7 m
Liquid temperature up to +40°
Installation And Use
They are recommended for pumping cean water and liquids that are chemicaly non aggresive to the materials which the pump is made.
Their Realibility And Quiet Running Make Them Suitable For Domestic And Civil Applications, Because The Pump Is Fully Submersible With The Motor Cooled By The Pumped Liquid, IT Can Be Used Safely In Wet Environments And In Spaces Inssufficient Ventilation.
Construction Characteristics
- Outer Case And Motor Support : Stainless steel AISI 304 case with threaded ports ISO 228-1
- Impeller and Diffuser : Technopolymer
- Diaphragms : Stainless steel AISI 304, complete with anti-wear rings
- Motor Shaft : stainless steel EN 10088-3-1.4104
- Double Seal : mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running
- Screws : stainless steel AISI 304
- Motor : electric, asynchronous continuous duty
- VLM 4 : single -phase 220÷240 V – 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kE motor has an external overload protector (with manual reset) incoporated into the control box
- Insulation : Class F
- Protection : IP 68
Standard Features
- VLm 2 (single-phase) 2 m power cable type “H07 RN-F” with removable connector control box with capacitor and Schuko plug
- VL 2 (three-phase) 2 m power cable type ” H07 RN-F” with removable connector
- VLM 4 (single-phase) 2 mt power cable type ” H07 RN-F” with removable connector control box with capacitor and Schuko plug
- VL 4 (there-phase) 2 mt power cable type “H07 RN-F” with removable connector
