Description
Pompa Celup Pedrollo Air Bersih TOP MULTI II
Range Of Performance
Flow rate up to 100 l/min (6 m3/h)
Head up to 30 m
Limits Of Use
Submersible depth up to 10 m
Liquid temperature up to + 40°C
Maximum sand content 50 g/m3
Empty level up to 30 mm from the bottom
Installation And Use
They are recommended for pumping clean water with a sand content ni higher than 50 g/m3.
Their high efficiency and reliability makes them suitable for supplying domestic water from tanks, reservoirs or relatively deep wells, drawing from cisterns, watering by hand or feedings.
Construction Characteristics
- Deliveri body and suction grid : glass filled technoplymer particularly resuistant to impact and corrosion, with threaded port ISO 228/1
- Impellers and Diffusers : Technopolymer
- Diffuser container : stainless steel AISI 304
- Motor Support : stainless steel AISI 304
- Motor Shaft : stainless steel EN 10088-3-1.4104
- Double Seal : mechanical seal ceramic – silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running
- Motor : asynchronous, for continuous duty
- Top Multi : single-phase 220÷240 V – 50 Hz with capacitor and thermal overhead protector
- Insulation : class F
- Protection : IP 68
- Registered model n° 72765
Standard Features
TOP-MULTI Float switch
Neoprene power cable “H05 RN-F” length 10 metres with Schuko plug
Hosetail
Coupling with non-return valve