Pompa Centrifugal Pedrollo Solar/ Diesel Pedrollo CK SelfPriming


Range Of Performance

Flow rate up to 50 l/min (3m3/h)
Head up to 51 m

Limits Of Use

Manometric suction lift up to 9 m
liquid temperature up to +90° (+55°C for diesel fuel)
Environment temperature up to +40°C

Installation And Use

They are recommended for pumping diesel fuel, clean water without abrasive particles and liquids that are chemically non aggresive to the materials from which the pump is made due to their operating principle, they are ideal where a compact self-priming pumps is needed or where liquids supply is irregulator contains air.
The pumps must be installed in enclosed places, or at least protected against inclement weather.

Construction Characteristics

  • Pump Body : cast iron, with threaded ports 228/1
  • Motor Bracket (Patent n° 1289150) : aluminium with brass insert : reduces starting difficulties due seizure of the impeller after long periods of inactivity
  • Impeller : brass of the star type with open radia vanes
  • Motor Shaft : stainless steel EN 10088-3-1.4104
  • Mechanical seal : ceramic – graphite – VITON
  • Electric Motor : the pumps are close-coupled : to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty
  • CKm : single-phase 230 V – 50 hz with capacitor and thermal overload protector
  • CK : three-phase 230/400 V – 50 hz
  • Insulation : class F
  • Protection : IP 44
  • Registered Model

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Copy Protected by Chetan's WP-Copyprotect.