Description
Pompa Celup Pedrollo Vortex TOP VORTEX (AUTO)
Range Of Performance
Flow rate up to 180 l/min (10.8 m3/h)
Head up to 7 m
Limits Of Use
Dept up to 3 m
Liquid temperature up to + 40°C (90°C for a maximum periods of 3 minutes)
Passage of solid bodies up to ø 20 mm
Drainage level 25 mm from the bottom
Installation and Use
They Top-Vortex Pump is suitble for draining draining dirty water that is chemically non aggressive. The construction guarantess simple and safe operation due to the complete cooling of the motor by the pumped water and the double seal design.
It is recommended for domestic use, for the clearing of dirty water, for emptying tanks, domestic drains and collection traps, even with suspended solid bodies with dimensions up to to ø 20 mm
Construction Characteristics
- Deliveri Body : glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1
- Suction Grid : technopolymer
- Impeller : Technopolymer
- Motor Support : stainless steel AISI 304
- Motor Shaft : stainless steel EN 1088-3-1.4104
- Double seal : mechanical seal ceramic – graphite – NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running
- Motor : submersible asynchronous single-phase for continuous duty
- TOP-VORTEX : single-phase 220÷240 V – 50 Hz with capacitor and thermal overload protector
- INSULATION : class F
- Protection : IP 68
- Registered Model n°72765
Standard Features :
- TOP-VORTEX Float switch
- Hosetail
- Neoprene power cable ” H05 RN-F” length 5 meters with Schuko plug
